How to Find Your Utility's Outage Map
    November 14, 2026·GridPrepped Team

    How to Find Your Utility's Outage Map

    Your utility's outage map is on the company site. Find it from your bill, search [company] outage map, confirm your address, and bookmark the URL.

    Your utility's outage map is on your electric company's own website (or its dedicated outage subdomain), not on a national news map. Look at your electric bill for the company name, then search `[company name] outage map`, open the official result, check your address, and bookmark that working URL. Aggregators such as PowerOutage.us help with a regional picture. They do not replace your utility's map when you need an estimated restoration time or need to report that your house is dark.

    We checked every link here on November 6, 2026 and again on November 13. Links move. A fresh search beats an old bookmark that returns 404.

    Why does my utility's map matter more than a national map?

    Two different jobs get mixed up during an outage.

    National or state aggregators answer "how big is this?" PowerOutage.us collects live outage counts from utilities across the U.S. Its FAQ is blunt about gaps: white areas mean the site hasn't added that utility yet, or the utility doesn't report at that detail. When a big high-voltage line fails suddenly, its counts can be off for a while, because they come from meters that can't report their status.

    Your utility's map answers "is my street known, when might we get power, and how do I report?" Crews and estimated restoration times (ETRs) live there. Massachusetts puts this in writing. The Mass.gov power outages page links regulated companies' maps, then says the MEMA statewide outage map works at the town level, doesn't show outages by road, and leaves out municipally owned utilities. For restoration updates, Mass.gov tells readers to use the electric company's map, not the MEMA map. The state map is the overview. The utility map is where restoration times live.

    Use both layers if you want. Start with your utility when the lights are already out, after a two-minute check on whether the outage is just your house.

    How do I identify my electric utility in under a minute?

    Try these in order. Stop when you have a name.

    1. Read the bill. The delivery company name is printed on every statement. In retail-choice states you may buy energy from a supplier and still take delivery from a wires utility. The outage map belongs to the delivery company, the one that owns the wires.
    2. Check the meter or the door hanger. Many meters and account notices carry the utility brand.
    3. Ask a neighbor on the same transformer. Same pole, same company, usually.
    4. County-level federal data if you still don't know. EIA does not publish a ZIP-to-utility lookup. Form EIA-861 Service Territory lists counties where each utility has distribution gear, and more than one utility can share a county (EIA FAQ). The Energy Atlas retail service territories layer is the map form. Shortlist names, then confirm on the company site. Where a co-op, a city-owned utility and a big investor-owned company meet, the bill wins.

    What search terms actually get me to the official map?

    Use exact phrases. The first regular (non-ad) result is often right if the domain matches the company.

    What you typeWhat you want
    `[utility name] outage map`Interactive map or outage center
    `[utility name] report outage`Report flow (often the same hub)
    `[utility name] estimated restoration`ETR language on the official domain

    Sanity-check the domain. Prefer `*.pge.com`, `outagemap.duke-energy.com`, `outagemap.coned.com`, `*.fplmaps.com`, and similar company hosts over a random "outage tracker" blog.

    Expect redirects. On November 6 we checked a sample of large U.S. utilities. `https://www.pge.com/outages` redirected to the PG&E Outage Center on pgealerts.alerts.pge.com. Duke Energy's map answers at outagemap.duke-energy.com. Con Edison answers at outagemap.coned.com. Florida Power & Light's map hub we reached at fplmaps.com. Several older deep links we tried for FPL and other companies returned 404. A week later, National Grid's short nationalgridus.com/Outages link had started landing on a 404 page too, so we swapped in its current outage page below. Bookmark the URL that loads today. If it dies later, re-run the search rather than trusting a three-year-old blog list.

    What should I do on the map once it opens?

    Work the map like a checklist, on your phone if that is what you have.

    1. Search your address (or the nearest cross street if the map is picky).
    2. See whether your outage is already known. FirstEnergy's map help notes that icons mark problem areas, not every house, and that a missing icon does not mean your report was ignored (FirstEnergy outages map).
    3. Report it if your power is out and the map doesn't show you. Reporting still helps even when neighbors already called. Utilities say more reports improve locating the fault.
    4. Read the ETR if one exists. Severe storms often leave ETRs blank or rolling. Blank is information: crews have not committed a time yet.
    5. Note how often the map refreshes, if the site says. PG&E states the map updates about every 5 minutes, and up to 30 minutes in widespread events (PG&E report electric issue / outage map guidance). FirstEnergy says about every 15 minutes. Do not refresh every ten seconds on a dying battery.

    Keep Ready.gov power outage tips handy for generators, CO alarms, and fridge timing. If you might file a claim for spoiled food later, screenshot the outage details.

    Official maps we checked in November 2026

    This table is a dated spot-check, not a complete U.S. directory. Co-ops and city-owned utilities are often missing from national lists even when they have excellent local maps. Re-search your own company name.

    Utility (sample)Working entry point (checked Nov 6 and Nov 13, 2026)
    PG&E (CA)pge.com/outages → PG&E Outage Center / outage map
    Southern California EdisonSCE Outage Center
    San Diego Gas & Electricsdge.com/outages
    Florida Power & Lightfplmaps.com
    Duke Energyoutagemap.duke-energy.com
    Dominion Energy (VA path)Report outage or emergency
    ComEd (IL)ComEd outages
    Con Edison (NY)outagemap.coned.com
    National GridOutage reporting
    Xcel EnergyOutages and emergencies
    Oncor (TX)oncor.com/outages
    FirstEnergyOutages map
    BGE (MD)bge.com/Outages
    AEP Ohioaepohio.com/outages
    Evergyevergy.com/outages
    Consumers Energy (MI)Outage center

    For scale: on the evening of November 13, PowerOutage.us showed about 43,000 U.S. customers out on its homepage (a number that moves all day). Quiet days still have local outages. Your map is for your circuit.

    What if the utility site is overloaded?

    Big storms can overload official sites. An aggregator still answers "is the whole county dark?", and a text or phone outage alert from the utility beats refreshing a map that won't load.

    Do this in parallel:

    1. Call the outage number on your bill (or the number on the utility's outage page).
    2. Try the utility's SMS keyword if they publish one.
    3. Open the aggregator for regional scale only.
    4. Keep a paper copy of the outage phone number. Phones die. Paper doesn't.

    Weather alerts are a separate feed from outage maps. GridPrepped Alerts shows live local alerts by ZIP with no account (NWS, air quality, wildfire, river gauges, earthquakes). That does not replace your utility map. It answers whether a storm or fire warning is already up while you wait on restoration.

    If home, work, and a relative sit in different places, a free sign-in lets you watch up to 5 locations with a severity setting for each one (off, severe only, or moderate and up) and one grouped digest. Pair that with each location's utility bookmark. The alert says a warning is live; the utility map says whether your house is inside a known outage.

    Set it up before the next outage

    Do the boring steps on a calm day.

    1. Identify the utility from a recent bill.
    2. Open the official outage map. Confirm your address search works.
    3. Bookmark it in your phone browser. Add it to a home-screen shortcut if you use one.
    4. Sign up for the utility's own outage texts or emails if offered. Those utility texts are one layer; how to get warned before the power goes out covers weather alerts, county texts, and a weather radio as well.
    5. Write the 24-hour outage phone number on a card in a drawer.
    6. If someone you care about lives elsewhere, repeat for their utility. Different company, different map.

    Beyond the bookmark, a saved plan tells everyone what to do while the lights are out. GridPrepped emergency plans (free sign-in) cover communication, shelter-in-place, evacuation, medical reference, documents, and pets, and you can print or share them. For a quick anonymous check first, run the Grid Assessment and open your Grid Score. Personal use is free forever.

    Sources

    Do this tonight

    Bookmark your utility's official outage map

    About 10 minutes

    1. Read a recent electric bill and write down the delivery company name — the one that owns the wires, not a retail supplier.
    2. Search that name plus “outage map,” open the official site, and confirm an address search works.
    3. Bookmark the working URL on your phone and write the 24-hour outage number on a card in a drawer.

    Build your household's emergency plan

    Free, and built around where you live.